Small size: 0.5' x 0.6' x 0.25' (12.7 x 15.3 x 6.4 mm)ĭuring normal operation, this product can get hot enough to burn you.Integrated over-temperature and short-circuit protection.Power-saving feature maintains high efficiency at low currents (quiescent current is less than 1 mA while enabled).Power-good indicator can be used to tell when the regulator has reached and is maintaining its target output voltage.Precision-adjustable low-voltage cutoff with hysteresis can be used to protect batteries from over-discharging (quiescent current is approximately 10 ♚ per volt on VIN when regulator is disabled).Typical maximum continuous output current: 1.5 A (when input voltage is close to the output the Typical efficiency and output current section below shows how the achievable continuous output current depends on the input and output voltages).

Fixed 5 V output with +5/-3% accuracy (can be changed to 6 V using the SEL pin).Input voltage: 2 V to 16 V (note: this regulator requires 3 V to start, but it can operate down to 2 V after startup).Note that the startup current is limited to approximately 700 mA until the output voltage reaches the nominal voltage after startup, the available current is a function of the input voltage (see the Typical efficiency and output current section below).

These regulators have short-circuit protection, and thermal shutdown prevents damage from overheating they do not have reverse-voltage protection.

Pot Magnets with Cylindrical Borehole Screw-on.

Adjustable Step Up / Step Down Power Supplies.

12 V Step Up / Step Down Power Supplies.

3.3 V Step Up / Step Down Power Supplies.

How to wire adafruit trinket 5v guide